Steps to Follow while Replacing the Clutch Slave Cylinder in a Porsche in Morrisville
- September 28, 2021
- Porsche Repair
- Posted by Glenn Wood
- Comments Off on Steps to Follow while Replacing the Clutch Slave Cylinder in a Porsche in Morrisville
As a high-performance vehicle model, your Porsche requires regular servicing to ensure that you continue to enjoy the excellent performance. Any fault in the car can throw a wrench in the drivability of your car, leaving you frustrated with many repairs.
The clutch slave cylinder is one of the many components in your Porsche that is prone to faults. When the clutch slave cylinder malfunctions, there are some steps that you can take to correct the issue. Before we get to these steps, let’s break down what this vehicle component is, how it works, and how you’ll know it needs replacement.
The Clutch Slave Cylinder
The clutch slave cylinder is a part of the transmission system in your car that is responsible for changing gears and braking. In collaboration with the clutch master cylinder, the clutch slave cylinder enables the clutch to disengage when you press down the pedal. This allows the car’s transmission to shift safely.
The whole process is made possible by the pressure that the clutch slave cylinder receives from the clutch master cylinder. It triggers it to extend a rod, which then pushes against a lever to disengage the clutch.
This means that a failing clutch slave cylinder will have a negative impact on the clutch, preventing a proper shift in gears. When this happens, there’ll be a number of signs that you can notice.
Signs of Clutch Slave Cylinder Issues
Among the top signs of clutch slave cylinder failure that you should look out for in your Porsche is an abnormal spongy feel on the clutch. This will be obvious when you try to hold down the clutch in order to shift gears. In some instances the clutch may go all the way to the floor and not allow the clutch to disengage properly. This can be as a result of a leak in the hydraulic brake fluid that ensures there’s optimum pressure in the transmission system for the movement of the cylinders to engage and disengage the clutch.
If it’s not transmission fluid leak, the spongy feel on the clutch may also be due to worn out seals. These seals are also meant to ensure the right pressure within the transmission by containing the hydraulic brake fluid in the system.
Another sign of clutch slave cylinder issues is that you may notice dark red fluid under your car after having parked somewhere for a while. Whereas this happens when there are extensive leaks in the cylinders, the leaks can sometimes be smaller such that you’ll need a professional to spot them. A professional will also be able to pin-point the correct source of the leak since the clutch master cylinder could also be a source of the leak.
You may also experience some difficulty in shifting gears while driving. The clutch may hesitate to resume its normal position or even get stuck on the floor after you remove your foot. This is often as a result of low pressure within the hydraulic fluid in the transmission system.
Remember, the clutch slave cylinder works on pressure being transferred from the clutch master cylinder via the hydraulic fluid. This can be dangerous, especially when you’re driving along a busy highway, and the last thing you want is for your brakes to be unreliable. This is why you should stop and seek the help of a professional mechanic as soon as you experience clutch slave cylinder issues.
You should also look at the level of fluid in the transmission system. Other than the level of fluid, you should also look out for contamination in the fluid. Over time and with continuous driving, the level of fluid will go down needing a top up. The contamination may be as a result of bits chipping off the worn out parts and getting into the fluid. In either case, the clutch slave cylinder will be affected and so will the clutch.
Porsche Specialists: Glenwood Foreign Car
Clutch slave cylinder issues usually create a safety concern in your Porsche. This is why as soon as you notice any of the signs that might indicate there’s a problem, you need to seek the help of a skilled professional mechanic to help replace the faulty part.
Glenwood Foreign Car is here to help you. We serve clients in or around Upper Makefield Township, Yardley, Newtown, and Morrisville, PA. Give us a call today and our certified technicians will quickly restore the transmission system in your Porsche.